Flush marker LM106 in red with white rim and 100 m
Flush marker LM106 in white with black rim and 150 m
Flush marker LM106 in yellow with black rim and 200 m
Flush marker LM106 in green with white rim and 150 m

LM106 · Flush marker

Flush with the ground. Easy to read.

The large distance marker for the middle of the fairway, set with a standard 108 mm hole cutter.

from €9.90net per piece, plus VAT and shipping

Volume prices: from 18 pcs €9.50.

Colours shown

  • Black / White
  • Red / White
  • White / Black
  • Yellow / Black
  • Green / White

More colours: black, white, red, green, grey, blue. Yellow and special colours on request. Up to four colours per part.

  • Solid 4 mm top on 8 ribs
  • 30 mm digits, 17 mm club logo
  • Rim and accent ring in contrast colours
  • ASA, UV and weather resistant

Data sheet (PDF)

Specifications

Specifications Flush Marker LM106
Diameter106 mm
Height16 mm, open at the bottom
Top4 mm, fully solid
Wall and ribs2 mm, 8 ribs, centre hub
Tool108 mm hole cutter
MaterialASA, colours inside the material
Letteringnumber up to 3 digits plus m or yd, 17 mm club logo
Coloursup to 4 per part

Installation in four steps

  1. Cut the hole

    Cut about 2 cm deep with the 108 mm hole cutter.

  2. Fill the marker

    Fill the underside with soil from the plug and press it down. The ground then carries the load.

  3. Align and insert

    Turn the number towards the tee and press it in flush.

  4. Done

    No glue, no concrete. To move it, simply cut it out again.

Questions about the Flush Marker LM106

Which tool do I need?

The standard 108 mm hole cutter that every course uses for the holes on the green.

Does it hold when someone steps on it?

The top is 4 mm fully solid and rests on 8 ribs. Filled with soil, the ground carries the load as well.