Quality
Built for sun, frost and mowers.*
What the markers are made of, how we produce them and what we check before every print. Only claims we can back up.

Material
ASA for every part that goes on your course.
ASA is a plastic made for outdoor use. According to the manufacturer, it is UV and weather resistant and keeps its shape up to about 100 °C.
Why not PETG?
We only use PETG for test parts. In full sun, white PETG can yellow and red can fade. That is why everything that goes on your course is made from ASA.
What makes the difference
Colour inside the material
Digits, rim and logo are printed 1 mm deep, in several colours in one pass. Not painted, not stuck on.
Matte face
The face lies on a textured plate during printing. It comes out finely textured and glare-free.
Chamfered edge
The visible edge is chamfered. No sharp edges.
Solid where it matters
LM106 flush marker: 4 mm fully solid top on 8 ribs. P60 fairway marker: socket completely filled, the spike sits in solid material.
Checked before printing
Every part is checked automatically: line width at least 1.2 mm, spacing, fit and closed bodies.
Our own 3D print farm
Made in our own 3D print farm in Seligenstadt, Germany. Multi-colour in one pass, no intermediaries, short lead for reorders.
See for yourself.
Before every series you receive a sample to hold in your hand.
* Designed for outdoor use under normal conditions on golf facilities. Durability and colour fastness depend on location, weather, care and mechanical load. Material data according to the material manufacturer. No durability guarantee beyond the statutory or contractually agreed warranty.